RAPID PACK SERIES FC218 INJECTION MOLDING MACHINE

• After-sales Service: 24 HOURS
• Warranty: 1 year
• Type: Preform Injection
• Structure: Horizontal
• Plastic Type: Thermoplastic
• Plasticizing Way: Screw Type
• Model NO.: FC218
• Clamping Way: Hydraulic & Mechanical
• Automation: Automatic
• Computerized: Computerized
• Certification: CE, ISO9001:2008
• Transport Package: Plastic Bag & Wooden Fixed
• Specification: 5.2*1.3*2.1M
• Trademark: FORSTAR
• Origin: China
• HS Code: 8477101090
• Production Capacity: 1200PCS/Year

Product Description

Parameters for Injection Molding Machine FC218 (RAPID PACK SERIES)

DESCRIPTION	UNIT	FC218
International size rating	--	2180/457
INJECTION UNIT
Shot volume	cm^3	268
Shot weight  (PS)	g	246
Screw diameter	mm	45
Injection pressure	MPa	169
Screw L:D ratio	--	23:1
Screw stroke	mm	170
Screw speed	r/min(max)	250
CLAMPING UNIT
Clamping force	KN	2180
Opening stroke	mm	480
Platen size	mm×mm	765X765
Space between tie bars	mm×mm	505X505
Max. Daylight	mm	1030
Mold thickness  (Min. Max.)	mm	180-550
Hydraulic ejection stroke	mm	100
Hydraulic ejection force	KN	67
Number of Ejector		5
POWER UNIT
Hydraulic system pressure	MPa	17.5
Pump motor	KW	30
Heating capacity	KW	13.7
Number of temp control zones	--	4
GENERAL
Oil tank capacity	L	300
Machine dimensions (L×W×H)	m×m×m	5.2X1.3X2.1
Machine weight	Ton	6.2

 
FORSTAR Injection Moulding Machine for Thin Wall Products

The high speed plastic injection machines in this series are in high rigidity.
All weighted parts or units have been analyzed through Finite Element Analysis so that they are in fine dimension and reasonable structured, keeping the complex stress under 100MPa. This enables good safety factory, small distortion and long service life, ensuring high precision of plastic products as well as mould protection.

In this way, the general performance is much better, including anti-vibration, fatigue resistant, low noise level, good stability, low failure rate, suitable for high speed running, small swing amplitude, resistant to vibration caused by impact, good plasticizing, short moulding cycle, and good repeatability and so on.

This high-speed plastic injection machines are equipped with quick response servo system.
Enabling the injectiuon speed to be as high as 240mm/sec and even reaches 500mm/sec with upgrade options.
 

-CLAMPING UNIT
Symmetrical stress mould clamping
By evenly distributing the clamping force, the platens bear
lower stress which can minimize the instance of platen
distortion,molding problem can thus be reduced.  

High Rigidity Platens with T-slot
Machines are equipped with high rigidity T-slot platens which
provides more flexibility and convenience for installation of
different kind of molds, service life of the platen can be
extended comparing with the platen with tap holes.  
Extended slides and friction belts for the moving platen
Machines are equipped with extended slides on the moving
platens, which greatly improved the stability of platen
movement during mould opening and clamping. Also, there are steel friction bells underneath the moving platen, it reduces the friction coefficient and thus improves the stability and precision of the platen movement, as well as protecting the mould.

Low pressure mould protection
Master Lubrication System
Tie bars and toggles are lubricated by a master automatic thin oil lubrication system which distributes thin oil automatically. The mould adjusting mechanism is lubricated by a manual master grease lubrication system(FC series only),both systems guarantee lubrication efficiency and thus improves reliability and stability of the machine.
 

 

-INJECTION UNIT
Unique double linear guide tracks
The injection unit is equipped with double linear guide tracks which improves the injection accuracy and stability.  With matrix high rigidity supporting base, the double linear guide tracks guarantee high stability of the whole injection unit.  

High-efficiency screw and  barrel
Screws with special design works perfectly during plasticizing providing excellent color mixing effect, can satisfies customer's different requirement on the products. The injection features also goes with a high rigidity nozzle and nozzle flange, these two parts together with the special designed screw head, check ring and check seat effectively guarantee higher repeatability as well as ensuring production effect.

General Safety features
These features include nozzle purge guard, fully  covered barrel, movable sliding hopper and centrallubrication system.  They not only guarantee safe machine operation but also higher production efficiency.
 

 

-CONTROL UNIT
Equipped with professional European KEBA computer to guarantee the production stability and efficiency.
Multi-stage PID barrel temperature control, non-volatile memory, oil-temperature monitoring.
Mould opening and clamping, injection, and pre-plasticizing are all monitored by high precision linear transducer (accuracy can be as high as 0.1mm) ensuring fast response and high stability of the control system.
More than 500 molds data storage.
Computer hardware self-detect alarm function.
Digital and curve statistic display for injection end.
Pre-heat function.
Supports remote monitoring.
 

About Our Factory

With investment of 250 million yuan, Guangdong FORSTAR Precision Machine Co., Ltd was established in 2007, which occupies area of 87,000 square meters. Forstar is a professional manufacturer to produce injection moulding machine ranging from 60 ton to 3000 ton and linear blowing machine. The annual manufacturing capacity is over 3500 standard units. Forstar is a new model precision  machine manufacturing enterprise under Guangdong SUNSLUX Group which face to the world in integrating R&D, manufacturing, sales, after-sales services, components supply and overseas marketing.It has been rated as a high-tech enterprise and appraised as Forstar precision machinery engineering technology research and development center by Guangdong Provincial Science and technology department.
Forstar company implements manufacture concepts of "advance design, precision manufacturing, demanding quality control, and successive refinement" and sets up strict ISO9001:2015 quality management system.
The sales and marketing branches of Forstar company spreads all over China's large and medium-sized cities.  At the same time, the products are exported to Russia, Hungary, Turkey, Egypt, Thailand, Vietnam, Malaysia, India, South Africa and other countries. Many technical service centers have been set up in domestic and abroad market to provide advanced technology and fast service to global users. Serve the world with excellent quality!







-Related Production Field